How Do I Factory Reset My SRX210?

A factory reset on your SRX210 will erase all configurations and restore it to its original factory settings. Here's how to do it:

Using the CLI:

1. Connect to the SRX210: Use an SSH client or a console cable to connect to the device.
2. Enter configuration mode: Enter the command configure
3. Reset the device: Execute the command commit-check clear-config.
4. Confirm the reset: Type yes when prompted.
5. Reboot the device: Use the command reboot.

Using the Web Interface:

1. Access the web interface: Open a web browser and enter the IP address of the SRX210.
2. Log in: Enter the username and password.
3. Navigate to the configuration menu: Find the "Configuration" or "System" section.
4. Select "Factory Default": Look for an option to reset to factory defaults.
5. Confirm the reset: Follow the on-screen instructions to confirm the reset.
6. Reboot the device: The device will likely reboot automatically.

Important Notes:

• A factory reset will erase all configurations, including passwords, usernames, and network settings.
• Ensure you have a backup of your configuration before performing a factory reset.
• The specific steps may vary slightly depending on the SRX210 firmware version.