Pressure washer concentrates are powerful cleaning solutions that need to be diluted before use. Here's how to use them effectively:
1. Read the Instructions
Always start by carefully reading the instructions on the concentrate bottle. This will specify the dilution ratio, which is the amount of concentrate to mix with water.
2. Choose the Right Dilution
The dilution ratio will vary depending on the type of concentrate and the surface you're cleaning.
- For general cleaning: A 1:10 dilution (one part concentrate to ten parts water) is usually sufficient.
- For tougher stains: You might need a stronger solution, like a 1:5 dilution.
3. Mix the Concentrate
- Use a measuring cup or jug to ensure accurate dilution.
- Fill the container with water first, then add the concentrate.
- Mix thoroughly to ensure the solution is evenly distributed.
4. Apply the Solution
- Use a garden sprayer or a pressure washer tank to apply the diluted solution to the surface you're cleaning.
- Work in sections to avoid the solution drying out before you can clean it.
- Allow the solution to dwell for a few minutes, then scrub with a brush or pressure washer nozzle.
5. Rinse Thoroughly
- Rinse the surface thoroughly with clean water to remove any residue.
- Inspect the surface to ensure it is clean and free of any remaining solution.
6. Store the Concentrate
- Store the concentrate in a cool, dry place away from direct sunlight.
- Keep the concentrate out of reach of children and pets.
Remember: It is important to use the correct dilution ratio for the concentrate. Using too much concentrate can damage surfaces, while using too little may not be effective.
