Fitting a chain to a BMX bike is a simple process that involves a few steps:
1. Prepare the Chain and Bike
- Remove the old chain: If you're replacing an old chain, use a chain tool to remove the master link.
- Clean the chainrings and cassette: Use a brush and degreaser to remove dirt and grime.
- Inspect the chainrings and cassette: Check for any worn or damaged teeth.
2. Connect the Chain
- Align the chainrings and cassette: Ensure the chainrings and cassette are properly aligned.
- Attach the chain to the chainring: Place the chain around the smallest chainring and the largest cog on the cassette.
- Connect the master link: Connect the master link by pushing the pins together.
3. Adjust the Chain Tension
- Pedal backward: This will help you feel the chain tension.
- Adjust the rear derailleur: Use the derailleur's adjustment screw to tighten or loosen the chain.
- Check the chain length: Ensure the chain is long enough to allow for full range of motion on the cassette.
4. Final Check
- Spin the pedals: Make sure the chain moves smoothly and does not slip.
- Test the brakes: Ensure the brakes function correctly.
5. Enjoy Your Ride!
By following these simple steps, you can easily fit a chain to your BMX bike and get back to enjoying your rides.
