A2oz

How to Drain Water from a Samsung Diamond Drum?

Published in Appliance Repair 2 mins read

You can drain the water from your Samsung Diamond Drum washing machine by using the drain hose. This hose is typically located at the back of the machine and connects to a drain pipe or a standpipe.

Here's how to drain the water:

  1. Unplug the washing machine from the power outlet.
  2. Locate the drain hose. It is usually a black or gray hose attached to the back of the machine.
  3. Remove the drain hose. Carefully detach the hose from the drain pipe or standpipe.
  4. Place the end of the drain hose in a bucket or tub.
  5. Open the drain valve. This is usually a small knob or lever on the drain hose.
  6. Allow the water to drain into the bucket or tub.
  7. Close the drain valve once the water has drained completely.
  8. Reconnect the drain hose to the drain pipe or standpipe.
  9. Plug the washing machine back in.

Note: If your Samsung Diamond Drum washing machine has a drain pump, you can also use it to drain the water. To do this, you will need to locate the drain pump button on the control panel and press it. The pump will then start to drain the water from the machine.

Important: Always unplug the washing machine before draining the water. Be careful when handling the drain hose, as it can be heavy when full of water.

Related Articles