G-code M140 is a command used in CNC machining to control the bed temperature of a 3D printer or other CNC machine. It sets the target temperature for the heated bed, which is often used to help materials adhere to the print surface.
Here's a breakdown of how it works:
- M140 is the specific G-code command for setting the bed temperature.
- S is the parameter used to specify the desired temperature in degrees Celsius.
- Example:
M140 S60would set the bed temperature to 60 degrees Celsius.
Here are some important points to remember about M140:
- Different Machines: The specific implementation of M140 can vary slightly between different CNC machines and firmware.
- Bed Type: The effectiveness of M140 depends on the type of heated bed you have. Some beds heat up faster than others.
- Material: The ideal bed temperature for printing will vary depending on the material you are using.
Practical Insights:
- Calibration: You'll need to experiment to find the optimal bed temperature for your specific materials and printer setup.
- Troubleshooting: If you're experiencing adhesion problems, adjusting the bed temperature can be a helpful troubleshooting step.
- Safety: Always be cautious when working with heated surfaces. Ensure you understand the safety guidelines for your specific machine.
Example:
Let's say you are printing with PLA filament. You might use the following G-code to set the bed temperature to 60 degrees Celsius:
M140 S60Once this command is executed, the bed will begin to heat up to the specified temperature.
Resources:
